Electro Standards Laboratories Announces Model 7371 With Remote Control Management Via ASCII RS232 Serial Data
Online, December 2, 2011 (Newswire.com) - The PathWay® Model 7371 is a Single Channel Cat6A RJ45 Switch with 3 positions of A/B/C switching and Serial Remote Control. This network switch, manufactured by Electro Standards Laboratories, utilizes high performance shielded RJ45 connectors and is certified for Cat6a compliance.
The Model 7371 switches all 8 pins of the RJ45 interface. The switch is also transparent to data speed and format allowing seamless network switching. Switch position can be controlled manually via a front panel pushbutton or controlled remotely via ASCII RS232 Serial Data commands. The DB9 remote control port allows total off-site monitoring and switch management including the ability to lockout the front-panel pushbutton control. The Model 7371 RJ45 Switch retains its last switch position in the event of a power loss and continues to pass data.
A CE and UL listed wide range power module (item #517277) with 100VAC/240VAC, 50Hz/60Hz operation can be ordered in place of the standard power module to accommodate switching applications worldwide. Custom length RJ45 CAT6A cables are also available from Electro Standards Laboratories for the switch installation.
Specifications for the PathWay® Model 7371 Network Switch:
PORT CONNECTORS: (4) RJ45(F) shielded connectors labeled A, B, C, and COMMON.
COMPLIANCE: Interface meets or exceeds Cat 6A performance.
CONTROLS: (3) Pushbuttons to select A, B, or C.
DISPLAY: (3) Red LED's display switch position and indicate power presence.
REMOTE CONTROL: (1) DB9 female connector on rear panel accepts ASCII RS232 Serial Data for Remote Control operation.
POWER: UL approved 100VAC/240VAC, 50Hz/60Hz wall mount power module supplies 12 VDC, 500 mA to the unit.
DIMENSIONS: 19.0" W x 1.75" H x 10.0" D (48.3 x 4.4 x 25.4 cm)
WEIGHT: Approximately 5.5 lbs. (2.5 Kg)
If you would like more information about the PathWay® Model 7371 contact the staff at Electro Standards Laboratories at 401-943-1164.