Die Attach Materials in Electric Vehicles: IDTechEx Explores How the Market Will Grow

Figure 1 - Market forecasts for electric vehicles across more than 100 categories covering all types of vehicles in land, air, and sea.

The rise of electric vehicles is creating many new material opportunities. One such material class is the die attach material used in power electronics. Here, the trend towards higher power densities and, thus, higher operating temperatures are opening up the market to new non-solder solutions, despite the substantially higher costs of the alternatives. The IDTechEx report, “Die Attach Materials for Power Electronics in Electric Vehicles 2020-2030”, finds that metal sintering, including all Ag and Cu types, will become a $30M market by 2026 in electric vehicle power electronics. This article offers a review of this growing market trend.

Growth in the addressable market

Naturally, the electrification of mobility expands the power electronics market. In an electric vehicle, power electronics fulfill various functions including on-board charger, various HV-LV DC-DC converters, and the main traction motor inverter. The performance requirements across these functions differ. Yet some common technology trends cut across all of them. In particular, the operating temperature and frequency of power electronics are rising with profound consequences across device and material technology development and choices. The emerging generational shift towards SiC MOSFETs and GaN HEMTs partially underpins and certainly accelerates these long-term trends.​

Market drivers and alternative options

Figure 2 shows a traditional power module package. It outlines how and why many materials and designs will need to change to enable and sustain the trend towards higher power densities and junction temperatures. Today, the temperature is typically around 120-150C and is already approaching 175C in some cases. It will soon go higher, potentially approaching 200C or higher in the future.

This article and the associated study “Die Attach Materials for Power Electronics in Electric Vehicles 2020-2030” are concerned with die and substrate attach technologies. Today, solutions such as SAC solder are commonplace. The rise in operating temperature, as well as the need to prolong product lifetime under even harsher thermal cycles, pushes the requirements beyond what solders – especially lead-free ones – can achieve. As such, alternatives are needed. This need will only grow in the future. The IDTechEx report offers a detailed assessment of all existing and die attach technologies, examines the market trends driving the need towards alternatives, reviews all solder alternative technologies and solders, analyses all modules and module makers who have demonstrated solder alternatives, and develops quantitative realistic market forecasts segmenting the market by electric vehicle type, power electronic function, and material, such as solder, micro-sized Ag metal sintering, nano/hybrid metal sintering, Cu sintering, and TBL.

Trends in metal sintering

Metal sintering is one such alternative. The technology has been in development mode for over a decade. It is already commercialized in applications such as renewables and also in leading electric vehicles. Here, metal particles are sintered with or without pressure to form a near solid-like thin film, offering high joint shear strength, high thermal conductivity (150-300 W/mK), and a very high bulk-like melting temperature (962C) resulting in a high homologous temperature. 

Traditionally, micro-sized silver particles and pressure sintering have been used. Here, the paste is typically stencil or screen printed. It is then dried, e.g., 60-120C for 5-15min. Next, it is sintered on a head substrate, e.g., 130C, using a pressure (e.g., 30MPa @ 200-250C) for a few minutes (e.g., 3-5min). This pressure sintering technology is the most mature, is able to support the largest die areas, and offers the highest shear strength. It, however, requires additional equipment, and can not easily support uneven module topographies and/or ultra-thin dies.

Many are now developing varieties that enable pressure-free sintering and/or are reducing the sintering pressure or temperature. Typically, pressure-free sintering takes too long, e.g., 200 min. It also only supports small die areas, e.g., 24 mm2. Companies are now offering silver nano and/or hybrid pastes able to at least partially alleviate these performance shortcomings. Suppliers of such products are multiplying, and some have already found their way into the market. To learn more about all the technologies and all the players, including all players offering nano or hybrid sintering pastes, please see the IDTechEx report “Die Attach Materials for Power Electronics in Electric Vehicles 2020-2030”.

In parallel, companies are sampling copper-based metal sintering pastes. This work is motivated by (a) the lower cost of raw copper, and (b) the potential lack of CTE mismatch between copper joins and copper clads. Despite these appeals, there remain some hurdles. Some solutions require metallization gas. Typically, hydrogen is used to speed up the process especially in pressure-less sintering. Otherwise, normally N2 is used during pressure sintering. In any case, additional equipment and process know-how are required. As ever, oxidization prevention and long-term reliability remain concerns. New semi-commercial Cu offerings are now close to addressing both of these concerns. To learn more about technology, readiness level, costs, suppliers, and market adoption of Cu and TBL, as well as Ag-based metal sintering alternatives, please see “Die Attach Materials for Power Electronics in Electric Vehicles 2020-2030”.

Market adoption and growth

IDTechEx has developed a detailed market study. Their work forecasts the market in value, mass/volume, and demand area. Their model considers the evolution of die area resulting from the emergence of wide-band-gap devices. These enable higher power densities, thus shrinking device area for a given power level and/or reducing the number of device elements often deployed to spread the current. Furthermore, their model builds on their 15 years of ongoing research in electric vehicle markets, which gives them access to granular and up-to-date market figures concerning all aspects of the great electric vehicle market (not just passenger cars). Building on their market knowledge, player insight, and technology understanding, IDTechEx segments the total addressable market forecasts by material type, electric vehicle type, and power electronic function. The materials covered therein include solder such as SAC, non-nano Ag sintering, nano/hybrid silver sintering, Cu sintering, and transient bonding liquid (TBL).

IDTechEx finds this to be an exciting market. The market suppliers who pioneered the development are now reaping the benefits. They remain ahead in terms of optimized compositions and future developments including product form factor (beyond paste). Many paste markets are now fast playing catch up. Overall, IDTechEx finds the market for all types of metal sintering combined will exceed $30M by 2026. The IDTechEx report offers market forecasts – in value and mass – segmented by electric vehicle type, power module function, and die attach material, including solder and SAC, LTB, nano-Ag, non-nano Ag, and Cu sintering.​

To connect with others on this topic, join us at The IDTechEx Show! Europe 2020, May 13-14, Estrel Convention Center, Berlin, Germany. Presenting the latest emerging technologies at one event, with six concurrent conferences and a single exhibition covering 3D Printing and 3D Electronics, Electric Vehicle Materials, Graphene and 2D Materials, Printed and Flexible Electronics, Sensors and Wearable Technology. Please visit www.IDTechEx.com/Europe to find out more.

IDTechEx guides your strategic business decisions through its Research, Consultancy and Event products, helping you profit from emerging technologies. For more information on IDTechEx Research and Consultancy contact research@IDTechEx.com or visit www.IDTechEx.com.

Media Contact:

Jessica Abineri

Marketing Coordinator


+44(0)1223 812300

Source: IDTechEx

About IDTechEx

Since 1999 IDTechEx has provided independent market research, business intelligence and events on emerging technology to clients in over 80 countries.

4a Downing Park, Station Road
Swaffham Bulbeck, Cambridge,
CB25 0NW

More Press Releases