NEW Atmel SAMA5D3 Series Cortex-A5 Boards By RONETIX
Ronetix announced a new SODIMM-sized System-On-Module (SOM) based on the newest Atmel's ARM® CortexTM-A5 based SAMA5D3 series processor. Clocked at 536MHz, SAMA5D3-CM offers 512MiB DDR2, 256MiB NAND Flash, 16MiB NOR Flash, 4MiB Serial Flash, and ex
Online, March 4, 2013 (Newswire.com) - Ronetix announced a new SODIMM-sized System-On-Module (SOM) based on the newest Atmel's ARM® CortexTM-A5 based SAMA5D3 series processor. Clocked at 536MHz, SAMA5D3-CM offers 512MiB DDR2, 256MiB NAND Flash, 16MiB NOR Flash, 4MiB Serial Flash, and extensive I/O including one Serial EEPROM SPI, 1-Wire EEPROM DS2431 and Gigabit Ethernet PHY. Measuring only 67x40mm, the SAMA5D3-CM runs Linux 3.6.9 and Android 4.0 BSPs.
Ronetix offers four different CM boards equipped with an Atmel ARM-based embedded MPU, as listed below, in a BGA324-ball BGA package:
- SAMA5D33-CM - populated with ATSAMA5D33
- SAMA5D35-CM - populated with ATSAMA5D35
- SAMA5D31-CM - populated with ATSAMA5D31
- SAMA5D34-CM - populated with ATSAMA5D34
All four boards are sharing the same circuit design with minor configuration and have an identical footprint.
SAM9A5D3x-CM Specifications:
- MCU: ATSAMA5D3x series, 536 MHz ARM®
CortexTM-A5 ARM v7-A Thumb2® processor @ 1.2V
- 512 MiB DDR2 SDRAM, 32-bit
- 256 MiB NAND Flash
- 16MiB MiB NOR Flash
- 4 MiB Atmel SPI Flash
- 10/100/1000 MBit/s Ethernet
- One Wire 1024-bits EEPROM and 64-bits ROM
- SO-DIMM 200 JEDEC MO-274 module
- Temperature: 0° +60°C oder -40° to +85° C
- RoHC - compliant
Availability
The Ronetix SAMA5D3 modules are available now, with a choice of Atmel SAMA5D31, SAMA5D33, SAMA5D34 or SAMA5D35 processors.
More information may be found at this:
http://www.ronetix.at/sama5d3x-cm.html
About RONETIX:
RONETIX is an Austrian company that produces and develops high-quality development tools to fit our customer's unique needs and provide service and support before, during and after the sale.